Electrical Safety Rescue Kit | 25kV & 36kV Emergency Rescue Equipment

Electrical Safety Rescue Kit

The Hand Helmet Electrical Emergency Rescue Kit is designed to support rescue and emergency intervention where electrical hazards may be present. It is available in portable hand-carrying and wall-mounted configurations for industrial, transport, utility, renewable-energy, and electrical work environments.

Hand Carrying Case

The Hand Helmet Electrical Safety Rescue Kit allows personnel to assist people in the presence of electrical hazards.

Available configurations include:

• VES25 – for electrical networks up to 25 kV

• VES36 – for electrical networks up to 36 kV

The portable case keeps essential electrical rescue equipment organised and ready for emergency intervention.

Suitable Applications

This kit is particularly suitable for:

• Road accidents

• Electric and hybrid vehicles

• Cable removal

• Work on photovoltaic panels

• Work on electrified railways

• Industrial applications

Technical Specifications

Hand Carrying Case Contents

Insulating Stool

Available in:

• 25,000 V model

• 36,000 V model

Insulating Gloves

• GLB3-36-10 – Class 3 for model VES25

• GLB4-41-10 – Class 4 for model VES36

Insulating Boots – TB19

Provides protection against step voltage caused by voltage gradients in the ground.

Insulating Stick – PPOLVES

Telescopic insulating stick equipped with a CSVES rescue hook and a pentagonal shape for improved grip.

Voltage Detector – TDPESEC

Detects all AC voltages of 127 V and above.

Note: Does not detect DC voltages.

Cable Cutter – CCIVES

Insulated cable cutter rated up to 36,000 V.

Talc Shaker – TS10T

Helps make insulating gloves easier to put on.

Fabric Case for Gloves – TS10

Provides mechanical and UV protection for insulating gloves.

Adhesive Marker Tape – S174JN

Suitable for:

• Marking off an intervention area

• Preventing a disconnect switch from being reset

• Supporting safer control of the emergency area

Instructions for Use – VESNOT

Diagram-based instructions designed for quick reading and guidance during an electrical emergency.

Models

Product Reference

Max Operating Voltage

Designation

Particularity

VES25

25,000 V

Valise Electrosecours 25v

25 kV stool and Class 3 gloves

VES36

36,000 V

Valise Electrosecours 36v

36 kV stool and Class 4 gloves

Advantages

An Electrical Safety Kit for Field Operations

Compact

The case measures:

600 × 400 × 310 mm

Its compact design makes storage in service and emergency vehicles easier.

Mobility

An exclusive wheel system and handle help personnel move the rescue kit to the intervention area.

Tough

The materials and manufacturing process are selected to provide durability and long service life.

High Visibility

Retro-reflective strips improve visibility during field operations.

Optimised Storage

The case is designed to pack a wide range of electrical rescue equipment into a compact space.

Wall-Mounted Rescue Kit – Low Voltage

The Hand Helmet Wall-Mounted Electrical Rescue Kit provides quick access to rescue equipment for intervention in the event of an incident on or near a low-voltage electrical installation.

Versions are also available for:

• 25 kV

• 36 kV

Suitable for indoor and outdoor use.

Uses

The storage unit can be supplied empty, with or without trays that can form shelves.

It can be used without components to accommodate other products while helping protect them from external environmental conditions.

An optional add-on unit is available to increase storage space.

Storage can be adapted using optional removable trays, including arrangements suitable for storing a set of medium-voltage (MV) fuses horizontally.

Wall-Mounted Kit Technical Specifications

• Weatherproof plastic enclosure

• Resistant to weather, dust, splashes, and marine spray

• IP54 protection

• UV-resistant transparent door

• Locking handle

• Handle can accommodate a seal or padlock

• Maximum padlock shackle diameter: Ø 4.8 mm

• Equipment mounting insert optimised for efficient storage and quick response

• Wall-mounting kit included

Complete PS2 Wall-Mounted Rescue Kit Contents

The complete PS2 wall-mounted rescue kit includes:

• 1 pair of Class 0 latex insulating gloves, size 10 – GLB0-36-10

• 1 protective bag for insulating gloves – TS10

• 1 bottle of talcum powder – TS10T

• 1 non-contact voltage detector – UNITAGUFE

• 1 telescopic insulating stick – PPOLF2/011APV

• 1 rescue hook for insulating pole – CSVES

• 1 insulating mat, size 0.6 × 1 m – TTCL0 0.6X1M

• 1 boundary tape – S174JN

• 1 set of 2 adhesive posters on the door for model identification and instructions in case of an electrical accident

Wall-Mounted Kit Models

Product Reference

Designation

PS2-BT-FR

Complete BT wall-mounted rescue kit with equipment and PPE – French version

PS2-BT-GB

Complete BT wall safety panel with equipment and PPE – English version

Accessories

Optional accessories include:

• Small adaptable additional storage unit

• Storage configuration suitable for horizontal storage of a set of MV fuses

• Removable trays for organising the available storage space