Morse 86 Series Drum Lifters
Morse 86 Series Drum Lifters
The Morse 86 series drum lifters were designed to create a mechanical design substituting the manual lifters or tag line lifting with secure mechanical replacement. Several industries deal with large drums that require lifting and transfer. Morse 86 is an innovative design that contributes to time efficiency, practicality and safety of the personnel. The security aspects of Morse 86 drum handling equipment are both based on decreasing the lifting accidents by a secure and locked transfer of large barrels.
Model 86
Made of carbon steel painted blue.
It is used to lift the loaded drum with your crane connected to the hook. It helps to loading and unloading the drums for transport and other applications.
The strap to secure the drum not to slip and prevent the drum from falling.
Safety Conscious Lifters with Under-Drum Support
Attach to crane, monorail or hoist
Set drum on bottom support
Secure chain around drum
Lift steel, plastic or fiber drum
Capacity: 1,000 Lb. (454 kg)
Lift and Transport Steel, Plastic or Fiber Drum:
22” to 23.5” (55.9 cm to 59.7 cm) diameter
23” to 38” (58.4 cm to 96.5 cm) tall
Accepts Diameter Adaptors for smaller drum down to 14” (35.6 cm) diameter
Where is this drum lifter used?
Docks and mezzanines
Oil rigs and other marine applications
Construction sites
Connect the drum and removing the drum from Morse drum 86:
Do not try remove the loaded drum with your bare hands which is unnecessary efforts everyone to avoid, we recommend to use the drum truck for easy handling as shown in the below picture.
We recommend to use the Model 160 4-Wheel Drum Truck for easy handling.
Attach the drum lifter to your hoist or crane to lift and move an upright drum. You may also attach it to your forklift with Morse model 284 Fork Hook.
Contact
+91 7729990663
info@handhelmet.com
handhelmet.com
